Yamato DP-6700, Technical Manual

Page: 21 / 55

YCO-201008
DP-6700 Technical Manual
1-18
Going back to the previous parameter
To go back to the previous parameter, press the key
while holding down the key.
+1 operation for parameter value:
Press the key to increment the parameter value 1.
Keeping the key down for a while automatically incre-
ments the parameter value by 1 continuously
If the value exceeds the setting range, the value reutrns to 0
-1 operation for parameter value:
Press the key to decrement the parameter value by 1
(or increment it by -1)
Keeping the key down for a while automatically decre-
ments the parameter value by 1 continously.
If the current value is 0, the maximum value appers.
+10 operation for parameter value:
Press the key while holding down the key to incre-
ment the parameter value by 10.
If the settings range of the parameter is less than 10, the op-
eration is enabled and "000" stays on the panel in the spite
of the operation.
-10 operation for parameter value:
Press the key while holding down the key to decre-
ment the parameter value by 10 (or increment it by -10)
If the settings range of the parameter is less than 10, the
maximum setup limit for the parameter stays on the panel in
spite of the operation.
Returning to Test Mode:
Press the key while holding down the key, and it
returns to test mode.
Note: Turn off the power and restart to make changes effec-
tive.
Chapter 1 Adjustment method