![background image](http://html.mh-extra.com/html/yamato/ba300/ba300_instruction-manual_905286007.webp)
4
2. PRE-OPERATION PROCEDURES
Installation Precautions & Preparations
WARNING!
1. Ground wire MUST be connected properly.
Ground wire must be connected to a proper grounding line or teminal in order to prevent
electric shock.
Never connect ground wire to gas lines or water pipes.
Never connect ground wire to telephone grounding lines or to lightning conductor rods. Fire or
electrical shock may result.
Never insert multiple plugs into a single outlet. Doing so may result in power cable
overheating, fire or drop in voltage
Always use a 220V dedicated power supply/outlet for the single-phase 220V All models.
2. Install in a location free of flammables and explosives.
Never install near flammables or explosives. This unit is NOT fire or blast resistant. Simply
switching the main power switch
“ON” or “OFF” can produce a spark, which could be relayed
during operation, causing a fire or explosion when near flammable or explosive fluids,
chemicals or gases/fumes. See
“List of Hazardous Substances” (P.41).
Summary of Contents for BA300
Page 2: ......