![background image](http://html.mh-extra.com/html/yamato/ba300/ba300_instruction-manual_905286020.webp)
17
4. OPERATION PROCEDURES
Auto Stop Mode
To stop/terminate auto stop operation manually
Operation stops automatically when timer reaches 0.00. An
accompanying alarm sounds for approximately five seconds after
operation terminates.
Center display shows
, indicating end of operation, with
AUTO STOP lamps illuminated. Press the START/STOP key at any
time during operation or after operation ends, to terminate auto stop
operation mode. Displays will return to initial settings screen.
Editing or
confirming settings
Changing temperature setting or timer setting during operation can be
done by pressing the TIMER key. Use the
▼▲ keys to change the
setting values. Press the ENTER key when changes have been
entered as desired.
Press the
▼ key at any time thereafter to see temperature setting,
operation mode and remaining time in the center display.
Note:
Remaining time may be seen
(center display) with
decimal point constant as an indicator that unit is in wait status while
temperature rises or falls toward an objective temperature. When
decimal point begins flashing, timer is counting down.
Summary of Contents for BA300
Page 2: ......