![background image](http://html.mh-extra.com/html/yamato/ba300/ba300_instruction-manual_905286025.webp)
22
4. OPERATION PROCEDURES
Programmed Operation
Building Programs
The program pattern below will be used as an example for building programs:
1. Turn on main power switch (ELB ON
“|”)
Initial values will be shown for about 4 seconds after
power-on, then displays will switch to the initial settings
screen, showing current chamber temperature (top),
operation mode character (center) and overheat prevention
setting (bottom).
2. Select program mode/program pattern
Press the PROGRAM key once.
The top display will show previously used program.
Pressing the PROGRAM key again will cause program mode
to begin flashing.
Pressing the PROGRAM key repeatedly thereafter will toggle
between the 3 available program modes (while flashing).
Summary of Contents for BA300
Page 2: ......