![background image](http://html.mh-extra.com/html/yamato/ba300/ba300_instruction-manual_905286034.webp)
31
5. HANDLING PRECAUTIONS
WARNING!
1. DO NOT operate equipment when abnormalities are detected
If unit begins emitting smoke or abnormal odors for reasons unknown, turn off main power (ELB)
immediately, disconnect power cable from power supply, and contact a local dealer or Yamato
sales office for assistance. Continuing to operate without addressing abnormalities may cause
fire or electric shock, resulting in serious injury or death. Never attempt to disassemble or repair
unit. Repairs should be always be performed by a certified technician.
2. Hazardous substances
Never process explosive or flammable items. Fire or explosion causing serious injury or death
may result.
See “List of Hazardous Materials” on P.41.
CAUTION!
1. DO NOT climb on equipment
Do not attempt to climb onto unit or substitute it for a proper stepladder. Units are not designed to
support bodily weight and damage may result. In addition, unit may become unstable and tip
over or fall resulting in equipment damage, serious injury or death.
2. DO NOT place items on equipment
Do not place any objects on unit. Doing so may cause unit to become unstable and tip over,
resulting in possible equipment damage, injury or death..
3. DO NOT operate equipment during thunderstorms
In the event of a thunderstorm, turn off main power switch (ELB), and disconnect power cable
immediately. A direct lightning strike may cause equipment damage fire or electric shock,
resulting in serious injury or death.
4. Clean unit thoroughly before use
All BA series units are cleaned before shipping from the factory. To remove packing fragments
and other contaminants, which may have collected on unit in shipment, however, thoroughly
cleaning unit before initial use and after extended storage periods is recommended.
5. Use proper bath fluids
Using purified or distilled water in BA model units is recommended to prevent mineral deposit
accumulation.
Never use any fluid other than water. Periodically changing water and washing the bath reservoir
is strongly recommended.
6. Supplying water
Use care when adding water so that it does not spill on exterior of unit or onto controls and other
electronics. If water is spilled onto any of these surfaces, wipe off immediately with a soft,
absorbent cloth. Any water or fluid spilled and left on these surfaces may result in equipment
damage and/or short circuit or electric shock.
7. Proper shutdown
When turning off unit for the day or for extended storage, be sure to turn off the main power
switch and disconnect power cable from outlet.
Summary of Contents for BA300
Page 2: ......