4 - 19
ENG
CARBURETOR
• Fully turn in the accelerator pump adjust-
ing screw
3
.
• Check that the link lever
4
has free play
b
by pushing lightly on it.
• Gradually turn out the adjusting screw
while moving the link lever until it has no
more free play.
Carburetor installation
1. Install:
• Carburetor joint
1
NOTE:
Install the projection
a
on the cylinder
between the carburetor joint slots
b
.
T
R
.
.
3 Nm (0.3 m · kg, 2.2 ft · lb)
2. Install:
• Carburetor
1
NOTE:
Install the projection
a
between the carburetor
joint slots.
3. Install:
• Hot starter plunger
1
1
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
4. Tighten:
• Screw (air filter joint)
1
• Screw (carburetor joint)
2
T
R
.
.
3 Nm (0.3 m · kg, 2.2 ft · lb)
T
R
.
.
3 Nm (0.3 m · kg, 2.2 ft · lb)
