3 - 13
INSP
ADJ
7. Install:
• Air filter element
1
• Washer
• Fitting bolt
NOTE:
Align the projection
a
on filter guide with the
hole
b
in air filter case.
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
ENGINE OIL LEVEL INSPECTION
1. Start the engine, warm it up for several
minutes, and then turn off the engine and
wait for five minutes.
2. Place the machine on a level place and
hold it up on upright position by placing the
suitable stand under the engine.
3. Remove:
• Oil tank cap
1
1
4. Inspect:
• Oil level
Oil level should be between maximum
a
and minimum
b
marks.
Oil level is low
→
Add oil to proper level.
NOTE:
When inspecting the oil level, do not screw the
oil tank cap into the oil tank. Insert the gauge
lightly.
a
b
ENGINE OIL LEVEL INSPECTION
