YTI0013
R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
Page | 1
FITTING INSTRUCTIONS FOR YTI0013BK YOKE TOP INSERT
KAWASAKI NINJA H2 SX 2018
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
(
FOR CLARITY OF INSTRUCTIONS ONLY
)
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt –
the rubber
washers should be thrown away
!
Tools
Soft Mallet
FITTING INSTRUCTIONS
Push fit the R&G Yoke Top Insert into the hole in the top of the steering shaft and gently tap down using a soft
mallet, as shown above.
Regularly check to ensure the insert remains tight.
ISSUE 1 17/10/2018 (NSY)
