Yamaha YSP-5600BMK2 Page 105 Owner'S Manual Download

Page: 105 / 110

APPENDIX

➤

Specifications

105

YSP-5600

Amplifier section

• Rated Output Power

Array speaker (1 kHz, 1% THD, 4

) ............................ 74.8 W

Woofer (100 Hz, 1% THD 4

) .............................17 W + 17 W

• Maximum Effective Output Power

Array speaker (1 kHz, 10% THD, 4

) ............................. 88 W

Woofer (100 Hz, 10% THD 4

) ...........................20 W + 20 W

Speaker section

• Array speaker for Vertical Sound Beam

Type: Acoustic suspension type

Driver: 2.8 cm (1-1/8 in) cone magnetic shielding type 6 x 2

(L/R)

Impedance: 4

• Array speaker for Horizontal Sound Beam

Type: Acoustic suspension type

Driver: 4.0 cm (1-1/2 in) cone magnetic shielding type x 32

Impedance: 4

• Woofer

Type: Acoustic suspension type

Driver: 11 cm (4-1/2 in) cone non-magnetic shielding type x 2

Impedance: 4

Input jacks

• Audio Input

Optical ............................................................ 2 (TV, OPTICAL)

Coaxial........................................................................ 1 (AUX2)

Analog .................................................................1 pair (AUX1)

• HDMI Input .................................................. 4 (HDMI IN 1 to 4)

Output jacks

• HDMI output (ARC).................................................................1

• Subwoofer output....................................................................1

Other jacks

• INTELLIBEAM MIC .................................................................. 1

• SYSTEM CONNECTOR ........................................................... 1

• NETWORK............................................................................... 1

• UPDATE ONLY......................................................................... 1

• IR IN ........................................................................................ 1

• IR OUT.....................................................................................1

• RS-232C ..................................................................................1

Network

• Ethernet standard: 100BASE-T/10BASE-T

• Compatible with DLNA ver. 1.5

• Supported codecs

WAV (PCM format only) /AIFF/FLAC: up to 192 kHz

ALAC: up to 96 kHz

MP3/WMA/MPEG-4 AAC: up to 48 kHz

• AirPlay supported

• Internet Radio

Wireless LAN (Wi-Fi)

• Wireless LAN Standards ................................ IEEE802.11b/g/n

• Radio Frequency Band ................................................2.4 GHz

• WPS (Wi-Fi Protected Setup)

........................................... Push-Button-Method, PIN Method

• Security Type.................. WEP, WPA2-PSK (AES), Mixed Mode

Wireless LAN (Wireless Direct)

• Direct connection with mobile devices

Bluetooth

•

Bluetooth

version Ver. 2.1 +EDR

• Supported protocols

Receiving: A2DP, AVRCP

Transmitting: A2DP

• Supported codecs

Receiving: SBC, MPEG-4 AAC

Transmitting: SBC

• Wireless output .............................................

Bluetooth

Class 2

• Maximum communication distance

............................................ 10 m ([33 ft] without obstructions)

• Supported content protection method.......SCMS-T (receiving)

General

• Power Supply

[U.S.A. and Canada models].......................... AC 120 V, 60 Hz

[Taiwan model]................................... AC 110–120 V, 50/60 Hz

[China model] ................................................. AC 220 V, 50 Hz

[Other models] ................................... AC 220–240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models]............................................ 68 W

[Other models] .................................................................. 50 W

• Standby Power Consumption

HDMI Control Off, Network Standby Off .......................... 0.3 W

HDMI Control On, Network Standby Off .......................... 1.6 W

HDMI Control Off, Network Standby On

(Wired/Wi-Fi/Wireless Direct/

Bluetooth

) ......... 1.5/1.6/1.7/1.6 W

HDMI Control On, Network Standby On ......................... 3.1 W

• Dimensions (W × H × D)

Without Stands

........................ 1100 x 212 x 93 mm (43-1/4 x 8-3/8 x 3-5/8 in)

With Stands ... 1100 x 216 x 122 mm (43-1/4 x 8-1/2 x 4-3/4 in)

• Weight ........................................................... 11.7 kg (25.8 lbs)

Specifications are subject to change without notice.

Specifications

Summary of Contents for YSP-5600BMK2















































































































Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands

Yamaha YSP-5600BMK2, Owner'S Manual

Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands