Yamaha YSP-5600BMK2 Owner'S Manual Download Page 11

Page: 11 / 110

PREPARATIONS

➤

General setup procedure

PREPARATIONS

This completes all the preparations. Enjoy playing movies, music and other content with the unit!

• See “NETWORKS” (p. 49) for information regarding network connection and audio playback via a network.

General setup procedure

Installation (p. 12)

Position the unit to achieve the optimal surround sound effects. The unit can also be mounted
on a wall.

Connecting a TV (p. 22)

Connect a TV to the unit.

Connecting playback devices (p. 23)

Connect video devices (such as BD/DVD players) to the unit.

Other connections (p. 25)

Connect a subwoofer.

Use a network cable to connect the unit to a router in preparation for wired network connection.

Connecting the power cable (p. 26)

After all the connections are complete, plug in the power cable.

Initial settings (p. 27)

Perform initial setup, such as adjusting surround sound effects, before attempting playback.

Summary of Contents for YSP-5600BMK2















































































































Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands

Yamaha YSP-5600BMK2, Owner'S Manual

Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands