Yamaha YSP-5600BMK2 Page 64 Owner'S Manual Download

Page: 64 / 110

NETWORKS

➤

Playing back music with AirPlay

Select a song and start playback.

To operate playback, use the Music app on the iPod or iTunes on the PC.

“AirPlay” is shown in the front panel display, and playback begins.

• You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network

Standby” (p. 81) in the setup menu to “On”.

• You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network

Name” (p. 81) in the setup menu.

• You can adjust the unit’s volume from the iTunes/iPod during playback.

Caution

• When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could

result in damage to the unit or speakers. If the volume suddenly increases during playback, stop
playback on the iTunes/iPod immediately.

Summary of Contents for YSP-5600BMK2















































































































Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands

Yamaha YSP-5600BMK2, Owner'S Manual

Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands