PLAYBACK
➤
Wireless playback of audio via Bluetooth connection
En
46
Listening to music from a
Bluetooth
device (Receiving)
1
Press the
key on the remote control.
Bluetooth
is selected as an input source, and
“BLUETOOTH” is shown in the front panel display.
• If a
Bluetooth
device has been connected before, the unit will connect to the
last connected device when the
key is pressed. Terminate this
connection to connect a new device.
• If you are unable to select
Bluetooth
as an input source, be sure that
“Transmission” in the setup menu is set to “Off” (p. 82)
2
Turn on the
Bluetooth
function on the
Bluetooth
device.
The operation varies depending on the device. Refer to
documentation supplied with the device.
3
Select “YSP-5600” in the
Bluetooth
device list on
the device.
If a passkey (PIN) is required, enter the number “0000”.
The
indicator in the front panel display flashes while the
unit and
Bluetooth
device are being connected, and glows
steadily when the connection is established.
“Connect” is shown in the front panel display.
The
indicator or a completion message is displayed on
the
Bluetooth
device.
4
Play back a song on the
Bluetooth
device.
• With some
Bluetooth
devices, this unit must be specified as the destination for
audio output.
• Setting “Network Standby” in the setup menu to “On” allows the unit to be turned
on and off with
Bluetooth
device operations (p. 81).
B L U E T O O T H
Y
S
P-5600
PIN 0 0 0 0
1
2
3
4
5
6
7
8
9
0
Flashes while
processing a
connection
Glows when the
connection is
established
