manualshive.com logo in svg

Yamaha YFM25RY, Owner'S Manual

The Yamaha YFM25RY Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions, maintenance tips, and troubleshooting information to ensure you get the most out of your Yamaha YFM25RY. Visit our website today to download your copy and enhance your ATV experience.

Share
Download
background image

 

8-9

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU23211

 

Checking the spark plug 

 

The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the spark
plug should be removed and checked in accor-
dance with the periodic maintenance and lubrica-
tion chart. In addition, the condition of the spark
plug can reveal the condition of the engine.

 

To remove the spark plug

 

1. Remove the spark plug cap.

2. Remove the spark plug as shown, with the

spark plug wrench included in the owner’s tool
kit.

 

To check the spark plug

 

1. Check that the porcelain insulator around the

center electrode of the spark plug is a medi-
um-to-light tan (the ideal color when the ATV
is ridden normally).

TIP

 

If the spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-

 

stead, have a Yamaha dealer check the ATV.

 

1.  Spark plug cap

1

 

1.  Spark plug wrench

1

Summary of Contents for YFM25RY



































































































































Reviews:

No comments

Related manuals for YFM25RY

Brands by name

Popular brands

Load more brands