manualshive.com logo in svg

Yamaha YFM25RY, Owner'S Manual

Share
Download
Yamaha YFM25RY Owner'S Manual Download Page 113

 

8-41

 

1

2

3

4

5

6

7

8

9

10

11

WARNING

 

EWB02230 

 

Do not touch a headlight bulb when it is on or
immediately after it is turned off. You can be
burned or a fire could start if the bulb touches
something flammable. Wait for the bulb to cool

 

before touching or removing it.

 

5. Place a new headlight bulb into position.

NOTICE

 

ECB00650 

 

Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth

 

moistened with alcohol or thinner.

 

6. Install the headlight bulb holder by pushing it

in and turning it clockwise.

7. Install the headlight bulb holder cover.

 

1.  Headlight bulb holder

1

 

1.  Do not touch the glass part of the bulb.

1

Summary of Contents for YFM25RY



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands