CHAS
REAR SHOCK ABSORBER ASSEMBLY
HANDLING THE REAR SHOCK ABSORBER
This rear shock absorber contain highly
compressed nitrogen gas. Before handling the
rear shock absorber, read and make sure you
understand the following information. The
manufacturer cannot be held responsible for
property damage or personal injury that may
result from improper handling of the rear shock
absorber.
•
Do not tamper or attempt to open the
rear shock absorber
•
Do not subject the rear shock absorber to
an open flame or any other source of high
heat. High heat can cause an explosion due
to excessive gas pressure.
•
Do not deform or damage the rear shock
absorber in any way. If the rear shock
absorber is damaged, damping
performance will suffer.
V
V
V
V
V
WARNING
Gas pressure must be released before disposing
of a rear shock absorber and gas cylinder. To
release the gas pressure, drill a 2 ~3 mm hole at
the point
a
30 to 60 mm from its end as shown.
DISPOSING A REAR SHOCK ABSORBER
Wear eye protection to prevent eye damage
from released gas or metal chips.
V
V
V
V
V
WARNING
4-67
a
Summary of Contents for YBR250 2007
Page 1: ...YBR250 SERVICE MANUAL 5D1 F8197 E0 2007 ...
Page 2: ......
Page 359: ...YAMAHA MOTOR DA AMAZÔNIA LTDA ...
