CHAS
FRONT FORK
3. Check:
• shock absorber rod
1
Damage/Wear
-->
Replace.
Clogged
-->
Blow out all of the oil passages
with compressed air.
• oil flow switch
2
Damage
-->
Replace.
ASSEMBLING THE FRONT FORK LEGS
The following procedure applies to both front fork
legs.
•
Make sure the oil levels in both front fork legs
are equal.
•
Uneven oil levels can result in poor handling
and a loss of stability.
V
V
V
V
V
WARNING
•
When assembling the front fork leg, be sure to
replace the following parts:
- inner tube bushing;
- outer tube bushing;
- oil seal;
- boot.
•
Before assembling the front fork leg, make
sure
all of the components are clean.
NOTE:
1. Install:
• shock absorber rod
1
• rebound spring
2
4-48
•
The front fork leg has a built-in damper
adjusting rod and a very sophisticated
internal construction, which are particularly
sensitive to foreign material.
•
When disassembling and assembling the
front fork leg, do not allow any foreign
material to enter the front fork.
CAUTION:
Allow the damper rod to slide slowly down the
inner tube
3
3
3
3
3
until it protrudes from the bottom
of the inner tube. Be careful not to damage the
inner tube.
CAUTION:
1
2
3
1
2
Summary of Contents for YBR250 2007
Page 1: ...YBR250 SERVICE MANUAL 5D1 F8197 E0 2007 ...
Page 2: ......
Page 359: ...YAMAHA MOTOR DA AMAZÔNIA LTDA ...
