Yamaha YBR125 Custom, Service Manual, Page: 196 / 218

Starting system
ELEC
6.Measure
Elastic force of the electric brush spring
Fatigue or out of the normal value
→ replace it as a set.
Elastic force of the electric brush spring
560~840g
1.Install
Electric brush spring
Electric brush
According to the contary procedure of
“
Remova
Assemble
Note:
When assembling the electric brush, the electric
brush wire should, wrap the outer side of proje-
ction of electric brush spring clamp.
When assembling the eclectric brush, the binding
post of electric brush wire should slightly touch the
projection lying in the side of electric brush spring
clamp.
2.Install
Electric button
Note:
When installing the electric button, press down the
electric brush with min. screw driver to
avoid da-
maging the electric brush.
7-20