Yamaha YBR125 Custom, Service Manual, Page: 190 / 218

Starting system
ELEC
3.Starting motor
The capacity of the cross-bond must be equal to or
larger than that of the battery wire,otherwise, the
cross-bond will be burnt.
4.Starting relay
Check if the starting motor work.
If the starting motor is failure,replace it.
Connect the positive binding post of battery
to the cable of starting motor with cross-bond.
See figare.
Remove the adapter of starting relay from the bundle
conductor.
Connect the battery to the wire of starting relay with
cross-bond . See figure.
Check if the starting motor work.
If the starting motor is failure,replace it
Out of work
Out of work
Work
Work
Warning
1
2
7-14