Yamaha YBR125 Custom, Service Manual, Page: 181 / 218

Inspection of socket connector
ELEC
Inspection of socket connector
The dirt
,
rust and moisture on the socket connector
should be removed.
Remove
Socket connector
Dry every connector with air.
1.
2.
3.r
4.
5.
-
.
.
binding t
Evey socket connector should be connected and dis
charged for 2/3 times
Check if the wire is come off with hand
post is pulled out by hand,bend he
pin and insert the binding post into the socket co-
nnector again.
If the
6.
7. .
Connect
Socket connector
Check if the circuit is conducted with multitester
I
binding post.
Note:
f the non-conduction of circuit is found,clear
every
When checking the bale of wire,the procedure
of inspection must be done according to above
1/7 steps
When replacing the CDI ,every socket connecter
mustbe checked
The inspection should be done by inserting the
multitester to the socket connector seefigure.
.
.
7-5