3-40
CHK
ADJ
EAS00181
CHECKING THE FUSES
The following procedure applies to all of the fu-
ses.
CAUTION:
To avoid a short circuit, always set the main
switch to “OFF” when checking or replacing
a fuse.
1. Remove:
• Battery cover
Refer to “SIDE COVERS AND SEAT” sec-
tion.
2. Check:
• continuity
왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔
a. Connect the pocket tester to the fuse and
check the continuity.
NOTE:
Set the pocket tester selector to “
Ω
x 1”.
Pocket tester
90890-03112
b. If the pocket tester indicates “
∞
”, replace the
fuse.
왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖
11. Connect:
• battery leads
(to the battery terminals)
CAUTION:
First, connect the positive battery lead
,
and then the negative battery lead
.
12. Lubricate:
• battery terminals
Recommended lubricant
Dielectric grease
13. Install:
• Battery cover
Refer to “SIDE COVERS AND SEAT” sec-
tion.
CHECKING THE BATTERY/
CHECKING THE FUSES
+
om913(b)
Summary of Contents for XN125 2000
