Yamaha XN125 2000, Service Manual

Page: 172 / 259

CHAS
7-5
4. Adjust:
• brake disc deflection
왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔 왔
a. Remove the brake disc.
b. Rotate the brake disc by one bolt hole.
c. Install the brake disc.
NOTE:
• Tighten the brake disc bolts in stages and in a
crisscross pattern.
• Apply “Loctite” to the brake disc bolts.
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be brought
within specification, replace the brake disc.
왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖 왖
FRONT WHEEL AND BRAKE DISC
EAS00535
CHECKING THE SPEEDOMETER GEAR
UNIT
1. Check:
• speedometer gear unit
Bends/damage/wear
→
Replace.
EAS00539
ASSEMBLING THE FRONT WHEEL
1. Install:
• wheel bearings
• oil seals
a. Install the new wheel bearings and oil seals in
the reverse order of disassembly.
23 Nm (2,3 m¥kg)
T.R
LT
T.R
23 Nm (2.3m•kg)