Yamaha XN125 2000, Service Manual

Page: 81 / 259

3-32
CHK
ADJ
EASM0018
INSPECTING THE REAR SHOCK ABSOR-
BER
1. Remove:
• Side covers
Refer to “SIDE COVERS AND SEAT” sec-
tion.
2. Check
• Rear shock absorber mount
Looseness
→
Tighten
Bolt (upper)
Bolt (lower)
Refer to “REAR SHOCK ABSORBER AND
EXHAUST PIPE” section in chapter 7.
EAS00167
CHECKING THE TYRES
The following procedure applies to both of the
tyres.
1. Measure:
• tyre pressure
Out of specification
→
Regulate.
WARNING
• The tyre pressure should only be checked
and regulated when the tyre temperature
equals the ambient air temperature.
• The tyre pressure and the suspension must
be adjusted according to the total weight
(including cargo, rider, passenger and
accessories) and the anticipated riding
speed.
• Operation of an overloaded scooter could
cause tyre damage, an accident or an injury.
• NEVER OVERLOAD THE SCOOTER.
INSPECTING THE REAR SHOCK ABSORBER/
CHECKING THE TYRES
Basic weight
(with oil and
123 kg
a full fuel tank)
Maximum load*
187 kg
Cold tyre pressure Front Rear
Up to 90 kg load*
180 kPa 200 kPa
(1.8 kgf/cm 2 ) (2.0 kgf/cm 2 )
90 kg ~ 200 kPa 220 kPa
maximum load*
(2.0 kgf/cm 2 ) (2.2 kgf/cm 2 )
High-speed 200 kPa 220 kPa
riding
(2.0 kgf/cm 2 ) (2.2 kgf/cm 2 )
* total of cargo, rider, passenger and accessories
(execpt the motorcycle)
T.R
31.5 Nm (3.15m•kg)
T.R
17.5 Nm (1.75m•kg)