Yamaha XN125 2000, Service Manual

Page: 72 / 259

3-23
CHK
ADJ
CHANGING THE COOLANT
CAUTION:
• Adding water instead of coolant lowers the
antifreeze content of the coolant. If water
is used instead of coolant check, and if
necessary, correct the antifreeze concen-
tration of the coolant.
• Use only distilled water. However, if distilled
water is not available, soft water may be
used.
• If coolant comes into contact with painted
surfaces, immediately wash them with
water.
• Do not mix different types of antifreeze.
11. Install:
• radiator cap
12. Fill:
• coolant reservoir
(with the recommended coolant to the maxi-
mum level mark
)
13. Install:
• coolant reservoir cap
14. Start the engine, warm it up for several
minutes, and then stop it.
15. Check:
• coolant level
Refer to “CHECKING THE COOLANT LEVEL”
section.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
16. Install:
• Inner panel
• Front cover
Refer to “FRONT COVER, INNER PANEL
AND INNER FRONT PANEL” section.
• Box
• Rear carrier
• Seat
• Side covers
Refer to “SIDE COVERS AND SEAT” sec-
tion.
ZAUM0044