Yamaha VX200D, Owner'S Manual

Page: 62 / 81

Maintenance
57
Using an accessory battery (option)
Use a connecting cable between the (-) ter-
minals of the starting battery and accessory
battery. See the illustrations of the wiring
connections. This cable must be made from
wire equivalent to the starting battery cable.
WARNING
EWM00600
Use of smaller wire could lead to a fire.
NOTE:
If a battery selector switch is desired, consult
your YAMAHA dealer about correct wiring.
EMU29370
Disconnecting the battery
Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
EMU29390
Checking top cowling
Check the fitting of the top cowling by push-
ing it with both hands. If it is loose have it re-
paired by your Yamaha dealer.
EMU29400
Coating the boat bottom
A clean hull improves boat performance. The
boat bottom should be kept as clean of ma-
rine growth as possible. If necessary, the
boat bottom can be coated with an anti-foul-
ing paint approved for your area to inhibit
marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
1. Red cable
2. Black cable
3. Battery
1. Battery for accessories
2. Battery for starting
3. Large black lead
4. Large red lead for starting battery
5. Negative connecting cable
6. Power for accessories
7. Small red lead for accessory battery charg-
ing (optional part)
7
ZMU01942
4
3
5
1
6
2
ZMU04680
✩✩✬✤✫✲✣ ✪