Yamaha VMAX VMX12P, Owner'S Manual

Page: 28 / 125

INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key inserted
in the lock and with the mark on
the cap facing forward.
2. Turn the key counterclockwise to
the original position, and then re-
move it.
3. Slide the rider seat backrest rear-
ward and push it down.
NOTE:
_
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly installed and locked.
_
EW000024
WARNING
_
Make sure that the fuel tank cap is
properly installed before riding.
_
EAU03753
Fuel
Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
EW000130
WARNING
_
● Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.
●
Avoid spilling fuel on the hot
engine.
_
EAU00185
CAUTION:
@
Immediately wipe off spilled fuel
with a clean, dry, soft cloth, since
fuel may deteriorate painted surfac-
es or plastic parts.
@
EAU04194
ECA00102
CAUTION:
_
Use only unleaded gasoline. The
use of leaded gasoline will cause se-
vere damage to the engine internal
parts such as valves, piston rings,
exhaust system, etc.
_
1. Fuel tank filler tube
2. Fuel level
Recommended fuel:
UNLEADED GASOLINE ONLY
Fuel tank capacity:
Total amount:
15 L (3.3 Imp gal, 4.0 US gal)
Reserve amount:
3 L (0.7 Imp gal, 0.8 US gal)
u5gk12.book Page 7 Wednesday, June 13, 2001 8:55 AM