Yamaha VL7, Owner'S Manual

Page: 119 / 193

116
Feature Reference
●
Edit Mode
2-2: Dynamic Filter Resonance Key Scaling
Dynamic filter resonance key scaling produces natural timbral variations across the
range of the keyboard by allowing different resonance offset values to be applied to each
of three breakpoints set at appropriate keys.
• The
§
button (“
Bpag
”) can be used to go directly backward to the next
dynamic filter key scaling page without having to return to the main parameter
page.
●
Rez
≤
1.00 … 15.67.
The “
Rez
” parameter is linked to the main dynamic filter “
Resonance
” param-
eter, and has the same effect. This value also determines the main resonance value on
which all key-scaled variations are based (indicated by a dotted line on the graph).
●
Breakpoint 1 … 3 Key
≤
C-2 … G8.
Allows three separate key scaling breakpoints to be set at any notes between C-2
and G8. You can position the cursor at the appropriate breakpoint key parameter and use
any of the normal data entry procedures, or use the keyboard. To use the keyboard for
breakpoint entry, position the cursor at the appropriate breakpoint key parameter, press
the
•
button (“
Kbd
”), and then press the key at which you want to set the breakpoint
while “
Kbd
” appears in inverse characters.
No breakpoint can be set to a key lower than the breakpoint to its left.
●
Breakpoint 1 … 3 Offset
≤
-64 … 63.
Set the amount of resonance offset for each of the breakpoints defined by the
breakpoint key parameters, above. Negative values reduce the resonance, and positive
values increase the resonance at the corresponding breakpoint. No matter what offset
value is chosen, the actual resonance setting will never exceed its minimum or maximum
absolute value. When different offset values are applied to adjacent breakpoints, the
resonance varies smoothly between the breakpoints.