Yamaha VL7 Owner'S Manual Download Page 159

Page: 159 / 193

156

Feature Reference

●

Utility Mode

6: Miscellaneous

●

Display

≤

Reverse, Normal.

Determines whether the VL7 display appears in the normal way (black characters

on a white background) or reverse (white characters on a black background).

●

Confirm

≤

off, on.

Determines whether the “

Are You Sure?

” confirmation message will appear

during the following operations:

• Voice store.
• Disk save, load, rename, delete, format.
• Bulk data transmit.
• Edit recall.
• Demo mode entry.

•

Turning the confirmation function off can make operation faster and more
efficient by reducing the number of steps required for some operations, but it
also increases the danger of accidentally erasing important data. Use with
caution.

●

Memory Protect

≤

off, on.

Turns internal RAM memory protection on or off. When “

” no operations that

alter the contents of the internal memory can be performed. Be sure to turn memory
protection “

off

” before loading data, storing voices, receiving bulk data from external

equipment, etc.

•

The default Memory Protect setting is “

off

”.

•

Memory protect is automatically turned “

” when data that was saved with

Memory Protect “

” is reloaded.

Summary of Contents for VL7


































































































































































































Search results

Summary of Contents for VL7

Reviews:

Related manuals for VL7

Brands by name

Popular brands

Yamaha VL7, Owner'S Manual

Search results

Summary of Contents for VL7

Reviews:

Related manuals for VL7

Brands by name

Popular brands