Yamaha VL7 Owner'S Manual Download Page 173

Page: 173 / 193

170

Feature Reference

●

Utility Mode

5: Delete File

This function can be used to delete a specified data file on a floppy disk inserted in

the VL7 floppy disk drive. Six types of data files can be selected.

●

File Delete Procedure

Insert the Floppy Disk

Make sure the floppy disk containing the file you want to delete is properly inserted

in the VL7 floppy disk drive.

•

Also make sure that the floppy disk’s write protect tab is set to the “off” or
“write enable” position.

Select a File Type and press

[

Position the cursor at the type of file you want to delete, then press the

[

button.

Select a File and Press

[

When the file window appears, select the file you want to delete and press

[

Press

To Delete

When the “

Are You Sure?

” confirmation prompt appears, press the

button to delete the file (or

to cancel the operation). “

Now Executing

” will

appear while the file is being deleted, and “

Completed!

” will appear when the delete

operation is finished.

Press

]

Press the

]

button to clear the “

Completed!

” display.

All system and voice data.

All Utility System page settings and internal Microtuning data.

All 64 voices in the VL7 memory.

16 voices from 1 VL7 memory bank (A … D).

1 voice.

Any files not included in the above categories.

All

System

All Voice

1 Bank

1 Voice

Others

Summary of Contents for VL7


































































































































































































Search results

Summary of Contents for VL7

Reviews:

Related manuals for VL7

Brands by name

Popular brands

Yamaha VL7, Owner'S Manual

Search results

Summary of Contents for VL7

Reviews:

Related manuals for VL7

Brands by name

Popular brands