VL Version 2
45
4. New Features & Parameters
EDIT
●
Lvl to P/S
¯
-127 … 127
Sets the level of excitation signal applied to the pipe or string. Negative values
produce a reverse-phase excitation signal.
●
Lvl to Drv
¯
-127 … 127
Sets the level of excitation signal applied to the driver. Negative values produce a
reverse-phase excitation signal.
●
LPF Cutoff
¯
31.1 Hz … 24.0 kHz
Sets the cutoff frequency of the low-pass filter applied to the excitation signal.
●
Pulse Width
¯
0.0 … 99.2 %
Sets the pulse width of the excitation signal. Higher values produce a broader pulse
width.
■
Pulse Width at 50%
●
VlSns to Lvl
¯
0 … 16
Sets the sensitivity of excitation signal level to keyboard velocity. Higher values
produce a greater variation in excitation signal level in response to keyboard velocity.
●
VlSns to LPF
¯
0 … 16
Sets the sensitivity of the excitation signal low pass filter cutoff frequency to
keyboard velocity. Higher values produce a greater variation in filter cutoff frequency in
response to keyboard velocity.
●
VlSns to PW
¯
-16 … 16
Sets the sensitivity of excitation signal pulse width to keyboard velocity. Higher
values produce a greater variation in excitation signal pulse width in response to key-
board velocity. Negative values result in reduced pulse width.
50%
50%
Pulse
Width
Pulse
Width
70%
30%
■
Pulse Width at 70%
