Yamaha VL Owner'S Manual Download

Page: 29 / 87

4. New Features & Parameters

EDIT Mode

Initial Edit Page

ELEMENT

EFFECT

CONTROLLER

MODIFIER

ENVELOPE

MISCELLANEOUS

EDIT MODE

COMMON

●

Edit Mode Displays

In all Version 2 edit mode displays, parameters which are not available for editing

do not appear. In the original models such parameters appeared on the display but could
not be edited.

●

Voice Name & Element Name

The voice and element name entry method has been improved for easier operation.

The

(

) and

(

) function buttons are used to move the cursor to the desired

position in the name rather than the cursor buttons. In Version 2 the cursor

and

buttons perform the same function as the

and

buttons: i.e. selecting the

character for the current character position. The cursor

and

buttons can also be

used for this purpose.

Feature Reference pages: VL1

➯

31; VL1-m

➯

31; VL7

➯

●

Key Mode

Mono, Poly, Unison, Part

In addition to the original “

Mono

”, “

Poly

”, and “

Unison

” settings, the “

Key

Mode

” parameter now has a “

Part

” setting. When “

Part

” is selected a range of split

keyboard parameters are available via the

EDIT/COM/MISC/PART SETTING

page

(

page 28).

When the “

Key Mode

” parameter is set to “

Poly

” and the “

Voice Mode

”

parameter is set to “

Single

” or “

Dual

”, the

EDIT/COM/MISC/SETTING

page

“

Assign Mode

” parameter can now be set to “

Last Note

” (

page 26).

Feature Reference pages: VL1

➯

31; VL1-m

➯

PLAY

EDIT

Summary of Contents for VL
























































































Search results

Summary of Contents for VL

Reviews:

Related manuals for VL

Brands by name

Popular brands

Yamaha VL, Owner'S Manual

Search results

Summary of Contents for VL

Reviews:

Related manuals for VL

Brands by name

Popular brands