VL Version 2
10
Set the Breath Mode to “Touch EG”
Once the Version 2 voices are loaded you’re almost ready to try them out —
“almost” because there’s one more step necessary to play the voices without a breath
controller:
NOTES
■
The procedure below sets the breath mode to “Touch EG” so
“breath” control can be applied via keyboard touch response. This setting is
automatically selected when the VL1-VER2.ALL or VL7_VER2.ALL file is loaded,
so you may not need to bother with these steps if you’ve just loaded one of
these files. It is a good idea to check, anyway.
1.
Select the Utility Mode System Page
Press the
U
button to select the utility mode. Then, if it is not already se-
lected when the utility mode display appears, press the
¡
button to select the “
Sys-
tem
” function page.
2.
Set the Breath Mode to “Touch EG”
Use the cursor keys to move the cursor to “
Breath Mode
”, and press
[
to
call the “
Breath Mode
” function page. Make sure the cursor is located at the “
Mode
”
parameter and use the
=
and
-
buttons to select “
Touch EG
”.
It might be a good idea to increase the value of the “
VelGain
” parameter a bit for
easier response. The default values can be instantly recalled by pressing the
•
(
Init
)
function button.
3.
Return to the Play Mode
Press the
P
button to return to the PLAY mode.
2: Test Driving Version 2
