Yamaha VL, Supplementary Manual

Page: 12 / 24

Voice Lists
12
MIDI Data Format
■
MIDI Data Format for VL1, VL1-m, VL7 Version 2
1 MIDI receive
MIDI
<Rch> $8n ... Note Off
<Rch> $9n ... None On
<Rch> $Bn $01~$1F ... Control Change
$Bn $21~$77 ...
<Rch> $Bn $79 $00 Reset All Controllers
<Rch> $Cn ... Program Change
<Rch> $Dn ... Channel Aftertouch
<Rch> $En ... Pitch Bend
<Dev No> $F0 $43 $0m $7A ... Universal Bulk Dump With Additional Header
<Dev No> $F0 $43 $1m... Parameter Change
<Dev No> $F0 $43 $2m... Bulk Dump Request
$FE Active Sensing
Note : <Rch> : MIDI receive channel switch
<Dev No> : Device number switch
n : MIDI channel
m : Device number
Ignores the third byte of Note Off.
Ignores the second byte of Pitch Bend.
No incoming MIDI signals will be recognized in Demo mode.
The Voice number changes according to received Program Changes.
Program Change data Voice number
VL1,1-m : $00 ~ $7F A01(001) ~ H16(128)
VL7 : $00 ~ $3F A01(001) ~ D16(064)
$40 ~ $7F A01(001) ~ D16(064)
Reception may not be possible if Memory protect is ON in Bulk Dump.
Details of System Exclusive Messages are given later.
While Active Sensing is on, if no MIDI Active Sensing signals are received for
more than around 330 msec, the MIDI receive buffer will be cleared, and any
sound being generated will be cut off.
2 MIDI transmit
[for VL1, VL7]
MIDI
Note On/Off $9n ... <Tch>
Modulation Wheel 1 $Bn $01 ... <Tch>
Continuous Slider 1 $Bn $10 ... <Tch>
Continuous Slider 2 $Bn $11 ... <Tch>
Breath Controller $Bn $01~$1F, $21~$77 ... <on/off> <Tch>
Modulation Wheel 2
and Foot Controller 1,2
Foot Switch 1,2
$Bn $01~$1F, $21~$77 ... <on/off> <Tch>
$Cn ...
Program Change $Cn ... <Tch>
Aftertouch $Dn ... <Tch>
Pitch Bend Wheel $En ... <Tch>
and Octave Switch
Universal Bulk Dump
$F0 $43 $0m $7A ... <Dev No>
With Additional Header
Parameter Change
$F0 $43 $1m ... <Dev No>
Active Sensing $FE