2
2
Styles – P
laying Rhythm and A
ccompaniment –
Tyros3 Reference Manual •
37
Realtime Recording
In the BASIC Page, you can create a single Style by recording the individual channels one-by-one, using realtime
recording.
1
When you want to create a Style based on an existing Style, select
the desired Style to serve as the basis for recording/editing before
call up the Style Creator display.
2
Call up the operation display.
[DIGITAL RECORDING]
→
[B] STYLE CREATOR
The BASIC Page is shown.
3
If you want to create a new Style from scratch, press the [C] (NEW
STYLE) button to delete all channel’s data.
4
Select the desired section (Intro, Main, Ending, etc.) for your new
Style.
First close the RECORD display by pressing the [EXIT] button. Then use the [3
▲▼
]/[4
▲▼
] buttons to select the section to be recorded.
5
Use the [5
▲▼
]/[6
▲▼
] buttons to determine the length (number of
measures) of the selected section, then press the [D] (EXECUTE) but-
ton to actually enter the specified length.
Realtime Recording Characteristics—Loop Recording and Overdub Recording
●
Loop Recording
Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also
done using loops. For example, if you start recording with a two-measure MAIN section, the two measures
are repeatedly recorded. Notes that you record will play back from the next repetition (loop), letting you
record while hearing previously recorded material.
●
Overdub Recording
This method records new material to a channel already containing recorded data, without deleting the
original data. In Style recording, the recorded data is not deleted, except when using functions such as
Rhythm Clear and Delete (
). For example, if you start recording with a two-measure MAIN section,
the two measures are repeated many times. Notes that you record will play back from the next repetition,
letting you overdub new material to the loop while hearing previously recorded material.
When creating a Style based on an existing internal Style, overdub recording is applied only to the rhythm
channels. For all other channels (except rhythm), you need to delete the original data before recording.
You can specify the sections to be
recorded by using the Section buttons
on the panel. Refer to step 3 on
You cannot select INTRO 4 and ENDING
4 sections directly via the panel opera-
tion.
To call up the RECORD display again,
press the [F] (REC CH) button.
NOTE
NOTE
NOTE
5
-1
5
-2
4
NEXT PAGE
Summary of Contents for Tyros3
Page 1: ...EN Reference Manual ...
