ELECT
7-4
SWITCH CHECKS
CHECKING THE SWITCH
CONNECTIONS
1. Disconnect the main switch coupling
from the harness.
2. Verify if some wire is disconnected from
its terminal inside the coupling. If a wire is
disconnected, repair it.
Before checking the switches, see the
connection table and check the color
combinations.
To understand how to check the switches,
see the following example:
CAUTION:
Do not disconnect the couplings by pulling
them by the wires, otherwise the wires may
separate from their terminals.
NOTE:
If the coupling is dirty with mud or dust,
blow it with compressed air.
