ENGINE
INSPECTION AND REPAIR
4-36
3. Check:
• Cylinder liner
Wear/scratches => Replace or buff.
4. Measure:
• Cylinder – piston clearance
• If out of specification, replace piston and
rings.
NOTE:
Measure the cylinder diameter “C” at
various points 40 mm from the top of the
cylinder and determine the measurement
average.
Measurement steps:
• Measure the cylinder diameter “C” using
a suitable instrument.
a
40 mm from the top of the cylinder.
• If out of specification, grind or replace
cylinder, piston, and rings.
• Measure the lower end diameter of the
piston “P” using a micrometer.
b
4.0 mm.
*************************************
C=(X+Y)/2
Cylinder diameter “C”:
69.970~70.020 mm
<limit>: 70.1 mm
Piston skirt diameter “P”:
69.925~69.975 mm
