INSTRUMENT AND CONTROL FUNCTIONS
4-15
4
4. While holding the levers in the up-
ward position, lift the backrest up-
ward and remove it by pulling it to
the rear.
5. Close the sidebag lids.
To install the backrest
1. Open the sidebag lids. (See page
2. Fit the slot on each backrest brack-
et (left and right side) into the
groove of its holder.
NOTICE:
Be
careful not to scratch the fender
when fitting the slot into the
groove.
[ECA15372]
3. Push the rear of the backrest down
smoothly but forcefully to lock it in
place and make sure that the lever
hook on each side is securely fit
over its holder.
WARNING! Both
lever hooks must be securely
fitted over their holder. If the
backrest is loose, a passenger
might lose balance and fall.
[EWA14283]
4. Insert the key into the passenger
backrest lock, turn it clockwise,
and then remove the key.
5. Close the sidebag lids.
1. Backrest lever
2. Passenger backrest
1. Slot
2. Holder
1. Holder
2. Lever hook
U2C514E0.book Page 15 Tuesday, September 8, 2009 10:12 AM
