Errors shown on the front display
When an error is shown on the front display, check it in the following table.
Message
Contents
Solution
Check speaker
wires
The speaker cable(s) are
shorted.
Firmly twist the core wires of each of the speaker cables and then
reconnect them to this product and the speakers. For more details, refer
to the following.
(
Access denied
The media server (PC/NAS) is
denying access.
Change the share settings of the media server (PC/NAS) so this product
can access the folders on the media server.
Access error
There is a problem with the
network.
Check whether the router and/or modem are ON and whether this
product is connected properly with the router (or hub). For more details,
refer to the following.
(
“Connecting a network cable (wired connection)” (p.39)
(
“Preparing the wireless antenna (wireless connection)” (p.40)
Unable to play
Music files cannot be played.
Make sure the files are playable on this product. Refer to the following
for the music file formats supported by this product.
(
“Supported file formats on this product (network)” (p.143)
If the file(s) are supported by this product but still cannot be played, the
network may be overloaded.
Internal error
An internal error has occurred
with this product.
Please contact an authorized Yamaha service center to have it repaired.
Remote ID
Mismatch
The ID of the remote control
does not match.
If you are using a Yamaha CD player, set the “Remote ID” setting in the
Advanced Setup menu to “Auto”. For more details, refer to the
following.
(
“Configuring the Remote ID” (p.114)
Version Error
Error in updating the
firmware.
Try updating the firmware again. For more details, refer to the following.
(
“Configuring a network” (p.99)
(
“Updating the firmware via your network” (p.120)
Update Failed
Error in updating the
firmware.
Update the firmware again.
136
TROUBLESHOOTING > If you think there is a problem