Yamaha RN1000ASL User Manual Download Page 63

Page: 63 / 156

Listening to the radio

Preparing to listen to the radio

Setting the frequency steps

Model For

Asia and Taiwan

Set the radio tuning frequency steps of this product depending on your country or region.

At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM. Depending on your country
or region, set the frequency steps to 100 kHz for FM and 10 kHz for AM.

Push the

(Power) Switch on the front panel to turn the power OFF.

While pressing RETURN on the front panel, push the

(Power) Switch.

Turn SELECT on the front panel to choose “Frequency Step” and press SELECT.

Turn SELECT to choose “FM100/AM10” and press SELECT.

Push the

(Power) Switch to turn it OFF.

Push the

(Power) Switch again to turn it back ON.

This completes the settings.

NOTE

Preset (registered radio stations) and frequency will be initialized if you change the radio tuning frequency steps.

Summary of Contents for RN1000ASL





























































































































































Search results

Summary of Contents for RN1000ASL

Reviews:

Related manuals for RN1000ASL

Brands by name

Popular brands

Yamaha RN1000ASL, User Manual

Search results

Summary of Contents for RN1000ASL

Reviews:

Related manuals for RN1000ASL

Brands by name

Popular brands