Yamaha RN1000ASL User Manual Download Page 135 | Manualshive

Page: 135 / 156

background image

Problems with Bluetooth

Cannot connect with a Bluetooth device

(

The wireless antenna of this product is not up.

Stand the wireless antenna upright.

(

The Bluetooth function of this product is disabled.

Enable the Bluetooth function with “Bluetooth” on the Setup menu. For more details, refer to the
following.

(

“Configuring Bluetooth” (p.104)

(

The Bluetooth function of the Bluetooth device is OFF.

Turn ON the Bluetooth function of the Bluetooth device.

(

This product is connected to a different Bluetooth device.

Terminate the current Bluetooth connection and connect to the desired Bluetooth device. For more
details, refer to the following.

(

“Playing via a Bluetooth® connection” (p.72)

(

This product and the Bluetooth device are too far apart.

Move this product and the Bluetooth device closer together.

(

Interference from device(s) (microwave oven, wireless LAN, etc.) using the 2.4 GHz frequency
band is impeding wireless communications.

Move this product and/or the Bluetooth device away from those devices. Also, if your wireless LAN router
supports the 5 GHz frequency band, switch the connection to the 5 GHz band.

(

The Bluetooth device you are using does not support the A2DP and/or AVRCP profiles.

Use a Bluetooth device that supports the A2DP and/or AVRCP profiles.

(

The connection information registered to the Bluetooth device is not functioning properly for
some reason.

Delete the connection information of the Bluetooth device and then reconnect this product to the
Bluetooth device. For more details, refer to the following.

(

“Playing via a Bluetooth® connection” (p.72)

When connected via Bluetooth®, there is no sound, or the sound is intermittently
discrupted

(

The volume of the Bluetooth device is too low.

Turn up the volume of the Bluetooth device.

(

The output-switching of the Bluetooth device is not set to this product.

Set the output-switching of the Bluetooth device to this product.

(

The Bluetooth connection was cut off.

Reconnect the Bluetooth. For more details, refer to the following.

(

“Playing via a Bluetooth® connection” (p.72)

(

They are too far apart.

Move the Bluetooth device closer to this product.

135

TROUBLESHOOTING > If you think there is a problem

«
...
133
134
135
136
137
...
»

Summary of Contents for RN1000ASL





























































































































































Reviews:

No comments

Related manuals for RN1000ASL

Brand: OPW Pages: 4

Brand: Transition Networks Pages: 1

Brand: Kathrein Pages: 21

Brand: Magnat Audio Pages: 54

Brand: Walter Dittel Pages: 33

Brand: F&U Pages: 14

Brand: Icom Pages: 8

Brand: Interspace Industries Pages: 9

Brand: PCB Piezotronics Pages: 17

Brand: Sangean Pages: 26

FTDX5000D HF - PRODUCT REVIEW 12-2010

Brand: Yaesu Pages: 6

Brand: Sound Storm Pages: 19

Brand: Strong Pages: 35

Brand: Technisonic Industries Limited Pages: 43

Brand: Pyle Pages: 12

Brand: National Pages: 15

Brand: Firstcom Pages: 44

Brand: Icom Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands