“Wireless WAC” Display
(
The WAC (Wireless Accessory Configuration) function is for applying the wireless settings of an iOS device to another device and
wirelessly connecting to the network. The steps for connecting to a network using MusicCast Controller are explained in the
chapter “PREPARATION”. Therefore, how to cancel WAC is explained here.
(
The WAC message is displayed the first time you use the product and after it is initialized.
NOTE
(
It takes several seconds from turning the power ON until audio is played.
(
After turning the power OFF, do not try to turn it ON again for at least 10 seconds. Doing so may generate some noise.
Related links
“Making a wireless connection with your iPhone (WAC)” (p.140)
n
Operating the power with the remote control
When the
z
(Power) Switch on the front panel is ON, the product switches between ON/Standby each time
the
z
(Power) key on the remote control is pressed.
NOTE
When the product's power is in Standby, to turn the power ON without using the remote control, press the
z
(Power) Switch to turn it
OFF momentarily, and then press it again to turn it ON again.
43
PREPARATION > Turning the product ON