Connecting speakers
Connecting speakers
Use speaker cable (commercially available) to connect speakers to the product.
NOTICE
(
Use the speakers with an impedance of at least 4-ohm.
(
When connecting 2 sets of speakers (SPEAKERS A and SPEAKERS B), use the speakers with an impedance of at least 8-ohm.
(
When connecting 4-ohm (4-ohm or more but less than 8-ohm) speakers, change the speaker impedance on the Advanced Setup
menu.
COAXIAL
OPTICAL
USB
SERVICE
NETWORK
TV [ARC]
DIGITAL IN
ANTENNA
SPEAKERS
12V
0.1A
TRIGGER
OUT
SUBWOOFER
OUT
FM
AM
75
PRE OUT
L
L
R
GND
R
A
B
2
1
+
–
+
–
+
–
–
+
Rear panel
Speaker A
(Right channel)
Speaker A
(Left channel)
Speaker B
(Right channel)
Speaker B
(Left channel)
1
Peel off about 10 mm of insulation on the end of the speaker cable and twist its
core tightly.
10 mm
10 mm
(3/8”)
30
PREPARATION > Connecting speakers
