background image

RIVAGE PM10 System Setup Guide

6

Information

About copyrights

Copying of the commercially available musical data including 
but not limited to MIDI data and/or audio data is strictly 
prohibited except for your personal use.

About this manual

• The illustrations and LCD screens as shown in this manual are 

for instructional purposes only.

• Windows is a registered trademark of Microsoft(R) 

Corporation in the United States and other countries.

• Supply of this product does not convey a license nor imply 

any right to distribute content created with this product in 
revenue-generating broadcast systems (terrestrial, satellite, 
cable and/or other distribution channels), streaming 
applications (via Internet, intranets and/or other networks), 
other content distribution systems (pay-audio or audio-on-
demand applications and the like) or on physical media 
(compact discs, digital versatile discs, semiconductor chips, 
hard drives, memory cards and the like). An independent 
license for such use is required. For details, please visit
http://mp3licensing.com.

• The company names and product names in this manual are 

the trademarks or registered trademarks of their respective 
companies.

(rear_en_01)

(weee_eu_en_01)

European Models
Purchaser/User Information specified in EN55103-1:2009 
and EN55103-2:2009.
Inrush Current: 7.5A (on initial switch-on)

4.5A (after a supply interruption of 5s)

Conforms to Environments: E1, E2, E3 and E4

The model number, serial number, power requirements, etc., may 
be found on or near the name plate, which is at the rear of the 
unit. You should note this serial number in the space provided 
below and retain this manual as a permanent record of your pur-
chase to aid identification in the event of theft.

Model No.  

CS-R10

 

Serial No.

Information for Users on Collection and Disposal of Old 
Equipment

This symbol on the products, packaging, and/or 
accompanying documents means that used elec-
trical and electronic products should not be 
mixed with general household waste.
For proper treatment, recovery and recycling of 
old products, please take them to applicable col-
lection points, in accordance with your national 
legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save 
valuable resources and prevent any potential negative effects on 
human health and the environment which could otherwise arise 
from inappropriate waste handling.

For more information about collection and recycling of old prod-
ucts, please contact your local municipality, your waste disposal 
service or the point of sale where you purchased the items. 

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please 
contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European 
Union]

This symbol is only valid in the European Union. If you wish to dis-
card these items, please contact your local authorities or dealer 
and ask for the correct method of disposal.

PA_en_4  3/3

Summary of Contents for RIVAGE PM10

























































Reviews: