RIVAGE PM10 System Setup Guide
38
5.
Press the desired grid cell to patch a desired
channel.
For this example, press the grid cell on which the
INPUT jack (M1/RY SLOT1/1) intersects with input
channel (CH 1).
Patching the output ports
This section explains how to patch output channels to the
OUTPUT jacks to which the speaker system has been
connected in the “Connecting the devices” section.
1.
Press the PATCH button on the menu bar in
the touch screen.
The PATCH screen will appear.
2.
Press the Output tab.
3.
Use the knob in the upper-right corner to
display the desired OUTPUT jacks.
NOTE
If you press an on-screen knob that you want to control,
you will be able to operate the knob via the [TOUCH AND
TURN] knob.
If you select RY card slot 2 on the I/O rack (M1),
“M1/RY SLOT2” will appear.
4.
Use the knob in the lower-left corner to
display the output channels.
Summary of Contents for RIVAGE PM10
Page 1: ...CONTROL SURFACE CS R10 System Setup Guide EN...
Page 51: ...RIVAGE PM10 System Setup Guide 51 MEMO...
Page 52: ...RIVAGE PM10 System Setup Guide 52 MEMO...
Page 54: ......
