RIVAGE PM10 System Setup Guide
37
10.
Press the button that enables you to assign
channel outputs to the TWINLANe network.
For this example, select RY card slot 1.
11.
Press the APPLY button.
The setting will be applied to the output from the I/O
rack to the TWINLANe network.
12.
When a confirmation dialog appears, press
the OK button.
Patching the input ports
This section explains how to patch an input channel to the
INPUT jack to which a microphone was connected in the
“Connecting the devices” section.
1.
Press the PATCH button on the menu bar in
the touch screen.
The PATCH screen will appear.
2.
Press the Input tab.
3.
Use the knob in the upper-right corner to
display the desired INPUT jacks.
NOTE
If you press an on-screen knob that you want to control,
you will be able to operate the knob via the [TOUCH AND
TURN] knob.
If you select RY card slot 1 on the I/O rack (M1),
“M1/RY SLOT1” will appear.
4.
Use the knob in the lower left corner to
display the input channels.
Summary of Contents for RIVAGE PM10
Page 1: ...CONTROL SURFACE CS R10 System Setup Guide EN...
Page 51: ...RIVAGE PM10 System Setup Guide 51 MEMO...
Page 52: ...RIVAGE PM10 System Setup Guide 52 MEMO...
Page 54: ......
