Yamaha Programmable Mixer 01, User Manual, Page: 13 / 154

Rear Panel
5
ProMix 01 User’s Guide
Rear Panel
R L
2TR IN
PHANTOM
MASTER
CH1~8
ON OFF
(+48V)
R
L
ST IN
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
POWER
ON OFF
PHONES MONITOR OUT STEREO OUT AUX SEND
INPUT
(BAL)
REC OUT MIDI
R L 4 3 R L
+4dB (BAL)
R L
ANALOG DIGITAL
COAXIAL OUT IN
A 0
9
8 7 6 5
1 4
3
2
–10dB
(UNBAL)
+4dB
(UNBAL)
+4dB
(UNBAL)
+4dB
(UNBAL)
–10dB
(UNBAL)
1. PHANTOM MASTER switch
This switch is used to turn the +48V DC phantom power ON and
OFF. Phantom power is switched simultaneously for input channels
1 through 8.
2. 2TR IN
These are RCA/phono jacks with a –10 dB nominal input level. Sig-
nals input here are fed through to the CUE/2TR IN switch and are
monitored via the monitor out and headphones. The outputs of a
2-track master recorder can be connected here for confidence mon-
itoring and playback.
3. ST IN
These are unbalanced 1/4" phone jacks with a +4dB nominal input
level. Signals input here are fed through to the stereo input channel.
The outputs of an external effects processor, or other device with ste-
reo line-level outputs can be connected here.
When no plugs are inserted, the 2TR IN signals are fed through to the
stereo input channel (see above note).
Note: When no plugs are inserted into the ST IN phone jacks, the 2TR
IN signals are fed through to the stereo input channel. This means that
you can apply EQ, etc., to the 2TR IN signals. When plugs are inserted
into the ST IN phone jacks, however, this connection is broken.