68
Parameters /
PATTERN GENERATOR Window
• HOLD MODE
Settings: Off, Mode 1, Mode 2
This determines the Hold setting for the Step Sequencer. The Pattern Hold function
causes the sequence pattern to continue playing after releasing the keys (as described
below). Selecting “Mode 1” or “Mode 2” automatically sets Hold to on.
Off
The pattern stops after the keys are released.
Mode 1
A pattern will be triggered every time a key is pressed.
Mode 2
A pattern will be triggered after the current sequence finishes, even if you press a key
during the middle of the current sequence.
• PATTERN ASSIGN (C#1)
Settings: User 001 ... User 128
This determines the User pattern number that will be assigned to the C#1 key on the key-
board (or the equivalent MIDI note number).
The key C1 is used to trigger the voice pattern (the pattern stored with the current voice).
Keys C#1 and above are used to select the User patterns. C#1 is always the base note
assignment for the first User Pattern to be selected. As shown in the illustration below, if
“Usr001” (User 001) is assigned to C#1, then pressing C#1 selects User Pattern 001,
pressing D1 selects Pattern 002, pressing D#1 selects Pattern 003, and so on. The User
Patterns are always selected in ascending order according to pattern number (001 -
128).
Pattern Assign lets you “shift” the starting pattern number. For example, if you assign
“Usr025” to C#1, then pressing C#1 selects User Pattern 025, pressing D1 selects Pat-
tern 026, pressing D#1 selects Pattern 027, and so on.
