66
Parameters /
PATTERN GENERATOR Window
STEP SEQ (Step Sequencer)
The Step Sequencer parameters only are in effect when the
control panel) is turned on. Also, in the Pattern Generator Window, the
should be clicked so that the Step Sequencer is selected.
Pattern Common Parameters (for both Voice Pattern and User Pattern)
• KEYBOARD MODE
Settings: Normal, NoteShift & Normal, PtnSel & Normal,
PtnSel & NoteShift
The Keyboard Mode setting designates how the Step Sequencer patterns respond to
notes played on the MIDI keyboard (as described below).
Normal
For triggering the Voice Pattern of the currently selected voice at its base pitch from
any key on the keyboard, and playing the voice normally across the keyboard. If Hold is
set to “off,” then the pattern will start each time you press a key.
NoteShift & Normal
Playing a key to the left of the
will shift the pitch of the pattern accordingly,
and playing keys to the right of the Split Point will play notes normally, without affecting
the sequence. For example, if the Split Point is set to C3, then you can shift the pitch of
the sequencer pattern with C1 ... B2, with C2 as the base pitch, and play normal notes
to the right.
