manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Owner'S Manual

The Yamaha MOTIF6 Voice Editor is a powerful software tool that allows users to easily customize and edit the voices of their Yamaha MOTIF6 synthesizer. With this intuitive manual, available for free download at manualshive.com, users can explore endless possibilities and enhance their music production experience.

Share
Download
background image

Appendix

298

MOTIF   Appendix

Section ................................................................................... 52
Section Selection.................................................................. 218
Segment ............................................................... 139, 143, 145
Selecting a Performance ........................................................ 88
Selecting Functions and Parameters ...................................... 71
Selecting Modes..................................................................... 67
Selecting the controllable functions....................................... 84
SELF .................................................................................... 265
SEND (Effect Send)............................................................. 206
SendXGon............................................................................ 255
Sens...................................................................................... 239
Separate Chord............................................................. 198, 226
SEQ TRANSPORT buttons................................................... 14
[SEQ TRANSPORT] buttons ................................................ 65
Sequence ................................................................................ 55
Sequencer block ..................................................................... 33
Sequencer settings................................................................ 254
SERIAL I/O connector .......................................................... 19
Set ................................................................................ 149, 154
SetAll ........................................................................... 195, 200
Setting up before recording.......................................... 184, 222
Setup ............................................................................ 184, 222
SeqCtrl ................................................................................. 259
[SF1] - [SF5] (Sub Function) buttons  ....................................14
Shape............................................................................ 168, 253
Shift Clock ................................................................... 198, 227
SIMM Installation................................................................ 288
SIMM Type and SIMM Configuration................................ 287
Single Part Plug-in Boards..................................................... 35
skip....................................................................................... 183
Slice ..................................................................... 237, 238, 246
slice + seq ............................................................................ 236
SLOT 1-3 lamps..................................................................... 15
SMF ..................................................................................... 263
Solo .............................................................................. 181, 218
Song ....................................................................................... 51
Song Chain............................................................................. 54
Song Edit mode........................................................ 31, 70, 189
Song editing in the Song Play mode .................................... 181
SongEventChase .................................................................. 255
Song Job............................................................................... 203
Song Job mode............................................................... 31, 193
Song Mixing and storing the settings as a template............. 117
Song Mixing Edit mode ......................................................... 70
Song Mixing Job mode ........................................................ 212
Song Mixing mode................................................... 31, 68, 205
Song Mixing Store mode ..................................................... 214
Song mode ............................................................. 31, 177, 275
Song Name........................................................................... 204
Song Play mode ............................................... 31, 67, 179, 275
Song Record mode................................................... 31, 69, 183
Song Recording.................................................................... 185
Song Scene........................................................................... 181
Song Selection ..................................................................... 179
Song Track Mute ................................................................. 115
Song track on/off — Solo and Mute .................................... 180
Song track selection ............................................................. 181
Song/Pattern (Phrase) cannot be recorded. .......................... 280
Song/Pattern and Arpeggio .................................................... 55
Song/Pattern cannot be started............................................. 280
sort ....................................................................................... 133
Sort Chord.................................................................... 197, 226
Sound is cut off. ................................................................... 279
Sound level is too low.......................................................... 279
Source  ......................................................49, 50, 134, 155, 236
Specifications....................................................................... 293
Speed.................................................................... 135, 147, 157
Split.................................................................................. 57, 95
Split Pattern.......................................................................... 231
Split Phrase .......................................................................... 229
Split Song To Pattern ........................................................... 204
SRAM .............................................................................. 42, 64
Start...................................................................................... 238
StepTime .............................................................................. 185
Start point............................................................................. 238
Standard MIDI file............................................................... 263
Status.................................................................................... 259
Step Recording....................................... 53, 104, 112, 185, 223
Stereo to Mono..................................................................... 245
stop....................................................................................... 183
Stop button ............................................................................. 14
Store mode ............................................................................. 71
Storing edited Voices............................................................. 86
Storing the edited Performance.............................................. 90
Storing the Song Scene  ........................................................181
Strength ................................................................................ 194
Style ....................................................................................... 52
Style Name........................................................................... 232
Style Selection ..................................................................... 217
SubDivide ............................................................................ 239
Sub Function  ..........................................................................71
Sustain............................................................................ 49, 174
SwingRate ............................................................................ 194
Switch .......................... 129, 131, 132, 167, 171, 189, 255, 258

Switching the MOTIF On .....................................................  29
Sync.....................................................................................  258
System Effects.......................................................................  39
System Exclusive (Exc) ......................................................  192
System Overview ..................................................................  33
System settings....................................................................  250

T                                

TEMPLATE........................................................................  206
Tempo .....................................  85, 92, 129, 132, 185, 223, 238
Tempo Speed.......................................................................  135
Tempo Sync ................................................................  135, 147
TG (Tone Generator) ..........................................................  250
TGSwitch ............................................................................  272
Thin Out ......................................................................  200, 227
ThruPort ..............................................................................  259
TIE ..............................................................................  185, 187
Time ....................................................................  131, 167, 171
TIME  ................................................................... 139, 143, 146
TimeMode ...........................................................................  131
Time-Stretch........................................................................  244
Tips for using the Slice Types.............................................  239
Tone Generator block............................................................  34
Top button .............................................................................  14
TR........................................................................................  203
Track ...................................................................................  235
Track Job.....................................................................  201, 230
Track Loop ..........................................................................  182
[TRACK SELECT] button .............................................. 15, 65
Track structure of Pattern......................................................  52
Track structure of Song.........................................................  51
Track Voice.........................................................................  218
Transmit ..............................................................................  271
TransmitCh..........................................................  169, 254, 272
Transmit switch...................................................................  272
Transpose ............................................  196, 226, 247, 251, 272
Trigger mode.................................................................  61, 237
Trigger Waiting...................................................................  237
Trim.............................................................................  237, 241
Troubleshooting ..................................................................  279
Tune ....................................................  138, 151, 173, 211, 250
Type

..  129, 132, 140, 148, 150, 184, 189, 236, 238, 245, 246, 265

U                                

Undo/Redo ..................................................................  193, 225
Unit......................................................................................  133
USB .................................................................................  18, 25
User Arpeggio .......................................................................  56
User Memory ........................................................................  64
User Phrase ...........................................................................  52
User Voice.............................................................................  59
User Waves – Samples..........................................................  44
Usr ARP ..............................................................................  263
usr wave (user wave)...........................................................  150
Utility Job mode............................................................  32, 260
Utility mode ............................................  32, 68, 249, 250, 276

V                                

Value ...........................................................................  185, 186
Variation................................................  39, 170, 210, 246, 275
Variation Pan ....................................................................... 169
Variation Return .................................................................. 169
Variation To Chorus ............................................................ 169
Variation To Reverb............................................................  169
Variation Type ....................................................................  169
VarSend (Variation Send) ...........................................  163, 172
VelCurve (Velocity Curve) .................................................  251
VelocityDepth .....................................................................  156
VelCrossFade ......................................................................  138
Velocity Limit .......................................  92, 129, 133, 138, 189
Velocity Limit H, L.............................................................  170
VelocityOffset .....................................................................  156
Velocity Rate.......................................................................  133
Velocity Range....................................................................  196
Velocity Sensitivity.............................  139, 142, 145, 151, 152
VelMode .............................................................................. 133
VelSensDpt .........................................................................  171
VelSensOfs..........................................................................  171
VELO OFST .......................................................................  182
Virtual Acoustic Plug-in Board.............................................  35
Vocal Harmony Plug-in Board .............................................  35
Voice ..  42, 150, 164, 170, 171, 188, 189, 206, 210, 223, 235, 263
Voice Edit .............................................................................  83
Voice Edit mode......................................................  30, 70, 129
Voice editing in the Voice Play mode ................................  127
Voice editing with the Control knobs ...................................  84
Voice Editor ........................................................................  263
VoiceELPan ........................................................................  172

Voice Job mode .............................................................  30, 158
Voice Master Equalizer .......................................................  253
Voice mode ...........................................................  30, 121, 275
Voice Play mode  ..................................................... 30, 67, 124
Voice program numbers 
and the corresponding Group/Numbers ..............................  125
Voice Selection ...................................................................  124
Voice settings ......................................................................  253
Voice Store mode ..........................................................  30, 159
Voice structure ......................................................................  45
Volume ........  132, 163, 167, 172, 189, 206, 211, 250, 254, 272
Volume Label ......................................................................  265
VOICE.................................................................................  206
VOL/PAN............................................................................  206

W                                

Wav .....................................................................................  263
Wave..............................................  44, 135, 137, 147, 150, 156
WaveCtgry ..........................................................................  137
Waveform........................................................  59, 60, 235, 263
Waveform Job .....................................................................  247
Wave Memory Required for Slice Operations ....................  239
Wave No..............................................................................  137
Width ...................................................................................  142

X                                

XG Plug-in Board..................................................................  35

Z                                

Zone...............................................................................  57, 270
Zone Edit .....................................................................  270, 271
Zone Switch.........................................................................  270

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews:

No comments

Related manuals for MOTIF6 Voice Editor

FARONICS DEVICE FILTER MAC Product Data Sheet preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 2
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Brand: Juniper Pages: 244
Mitsubishi WiFi-Doc Client for iOS User Manual preview
WiFi-Doc Client for iOS
Brand: Mitsubishi Pages: 10
Amanda Work.Group/Windows 3 User Manual preview
Work.Group/Windows 3
Brand: Amanda Pages: 106
Campbell Baler Instruction Manual preview
Baler
Brand: Campbell Pages: 16
Blackberry ENTERPRISE SOLUTION ERASING FI Overview preview
ENTERPRISE SOLUTION ERASING FI
Brand: Blackberry Pages: 10
Emerson Smart Wireless Navigator Reference Manual preview
Smart Wireless Navigator
Brand: Emerson Pages: 22
Emerson Site Manager User Manual preview
Site Manager
Brand: Emerson Pages: 130
Nokia PC Suite 6.7 User Manual preview
PC Suite 6.7
Brand: Nokia Pages: 29
Nokia NetMonitor Manual preview
NetMonitor
Brand: Nokia Pages: 29
Nokia N71 Service Manual preview
N71
Brand: Nokia Pages: 35
Nokia NPS6113000 - Secure Access System Getting Started Manual preview
NPS6113000 - Secure Access System
Brand: Nokia Pages: 48
Nokia N73 - Smartphone 42 MB Service Manual & Parts Manual preview
N73 - Smartphone 42 MB
Brand: Nokia Pages: 354
Nokia N73 - Smartphone 42 MB User Manual preview
N73 - Smartphone 42 MB
Brand: Nokia Pages: 265
Nokia Network Voyager Reference Manual preview
Network Voyager
Brand: Nokia Pages: 700
Ulead COOL 3D User Manual preview
COOL 3D
Brand: Ulead Pages: 100
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Installation Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Brand: Red Hat Pages: 110
GRASS VALLEY KAYAK HD-SD Datasheet preview
KAYAK HD-SD
Brand: GRASS VALLEY Pages: 8

Brands by name

Popular brands

Load more brands