Yamaha MOTIF6 Voice Editor Page 124 Owner'S Manual Download

Page: 124 / 300

124

MOTIF Reference

Voice Play mode

Reference

Voice mode

Voice Play mode

Basic Structure (page 30) · Quick Start Guide (page 80)

In this mode, you can select and play individual Preset
and User voices, as well as Plug-in voices (when
installed).

For details about voice types and memory (bank)
structure, see page 43.

◆

Basic Procedure

Press the [VOICE] button to enter the Voice Play

mode. (The indicator lights.)

●

Bank and Voice Program number

●

Category and Voice name

Select a voice.

Set the Keyboard Octave or MIDI transmit
channel.

Select the menu you wish to edit by pressing the

[F1] - [F6] buttons and edit the parameters in each
display.

When the Plug-in voice is selected (when the
Single part Plug-in board is installed), you can
press the [F2] button to call up the BANK display.

Store the settings edited in step #4 to the User
Memory as required.

Press any other mode button to exit from the Voice

Play mode.

• For detailed instructions on steps #2 - #4, see the

following explanations.

• For details on step #5, refer to “Voice Store

mode” on page 159.

Voice Selection

The explanations here apply to step #2 of the Basic
Procedure described above.
There are four ways in which you can select a Voice.

• Using the BANK, GROUP, NUMBER buttons
• Using the [INC/YES] and [DEC/NO] buttons
• Using the data dial
• Using the Category Search function

■

Using the BANK, GROUP, NUMBER

buttons

Press any of the BANK buttons to select a Bank.

• To select a Normal voice, press any of the

[PRE1] - [USER] buttons.

VOICE

Indicates the Keyboard
MIDI transmit channel.
See page 127 for details.

Indicates the functions
assigned to the respective
Control knobs. See pages
254 and 256 for details.

Indicates Keyboard Octave
setting set via the [OCTAVE]
buttons. See page 127 for
details.

Indicates the current
selected voice.

Number (selected via the
NUMBER [1]-[16] buttons)

Group (selected via the
GROUP [A]-[H] buttons)

Bank (selected via the BANK buttons)

Voice Program number (corresponding to
Groups A to H and Numbers 01 to 16)

Voice name

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Search results

Summary of Contents for MOTIF6 Voice Editor

Reviews:

Related manuals for MOTIF6 Voice Editor

Brands by name

Popular brands

Yamaha MOTIF6 Voice Editor, Owner'S Manual

Search results

Summary of Contents for MOTIF6 Voice Editor

Reviews:

Related manuals for MOTIF6 Voice Editor

Brands by name

Popular brands