Yamaha MOTIF6 Voice Editor Page 179 Owner'S Manual Download

Page: 179 / 300

179

MOTIF Reference

Song Play mode

Reference

Song mode

Song Play mode

Basic Structure (page 67) · Quick Start Guide (page 77)

In this mode, you can select and play individual User
songs.

For details about songs and their track and memory
structure, see page 51.

◆

Basic Procedure

Basic Operation (page 67)

Press the [SONG] button to enter the Song Play

mode. (The indicator lights.)

Select a song.

Start/Stop song playback.

Make necessary or desired settings (e.g., transpose,

tempo, location, individual track on/off status, and
so on) in the above display.

Select the menu you wish to edit by pressing the

[F2] - [F6] buttons and edit the parameters in each
display.

Set a Song Scene.

Repeat steps #3 through #6 as desired.

Press any other mode button to exit from the Song

Play mode.

• For detailed instructions on steps #2, 4, 5, and 6,

see the following explanations.

• For details on step #3, refer to “Quick Start

Guide” on page 78.

Song Selection

The explanations here apply to step #2 of the Basic
Procedure above.

Song track number
and data status

Currently selected song

Song track on/off status

SONG

Indicates muted track.

Indicates soloed track (page 180).

In addition to MIDI sequence data,
the sample data has been recorded.
(Indicates ansample track.)

MIDI sequence data
has been recorded.
(Indicates a MIDI track.)

No data has been recorded.

Location

setting for

the selected song

Tempo

for the selected song

❒

Setting

001.0~300.0

Measure : Beat

(for current playback location)

❒

Setting Depends on the song data

Time signature

for the selected song

❒

Setting

1/16 ~ 16/16, 1/8 ~ 16/8, 1/4 ~ 8/4

Transpose

setting (for entire song)

Can be adjusted in semitones.
For example, when a value of +12 is set,
the pitch of all of the data becomes one octave higher.

❒

Setting -36 ~ +36

Song name

Song number

Start playback

Stop playback

The explanations here apply when

these four button indicators are off.

PLG 2

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Search results

Summary of Contents for MOTIF6 Voice Editor

Reviews:

Related manuals for MOTIF6 Voice Editor

Brands by name

Popular brands

Yamaha MOTIF6 Voice Editor, Owner'S Manual

Search results

Summary of Contents for MOTIF6 Voice Editor

Reviews:

Related manuals for MOTIF6 Voice Editor

Brands by name

Popular brands